Tuesday, January 03, 2017

Tutorial: Super-easy two-tone infinity scarf

Who says you can't wear linen in the winter?  Using some amazing linen knit fabric from Britex, I sewed up a beautiful and warm color-blocked infinity scarf, perfect for the colder months.  For my version, I chose two different colors--turquoise and navy--but this tutorial would work equally well if you wanted to go with a single color of fabric.   Here's what to do.
Above is a photo of the end product, so you can see the big picture at the start.  In a nutshell, I cut two long rectangles of fabric, which I sewed together along the long edges to create a tube.  The tube ends were then sewn together to create a closed loop.  Okay, now that you know where you're going, cut your fabric!
For my scarf, I used the entire selvage-to-selvage width of the fabric (about 60") as the long edge.  To make it easier to cut, I folded the fabric in half lengthwise and cut a 14" strip of each fabric.  You can make your scarf wider or narrower as you like, but I found this to be just right--not too bulky, but still wide enough to feel cozy.

Placing the two 14"x60" fabric strips right sides facing, even out the ends to make sure both strips are exactly the same length.  (In the image above, the strips are folded in half length wise).

Keeping the strips facing, overlock the entire long edge of one side of the rectangle (the top side, in the diagram below).  Overlock the other long edge, keeping 2" on both ends were left unstitched (the bottom edge in the diagram).   This unstitched area allows you to sew the ends together later on.  At this point, you can turn the tube inside out to press the seams, but that's not necessary.
At this point, you should have a long tube, open at both ends.  To connect the open ends of the tube, with right sides and same colors facing, line up the the raw edges.  In the image below, the edges of the aqua fabric are lined up (right sides facing), with the navy fabric pushed out of the way for the moment.
Begin sewing at the side of the tube with the unfinished long edge.  Sew across the raw edge and other seam, adjusting the fabric as you go.  Continue the seam along the raw edge of the other color, finishing at the other side of the tube.  As you get to the end of the seam, it may take some work to keep the raw edges even.  Go slowly and maneuver the fabric around the rest of the scarf, which will emerge through the small opening when you are done.  
Pull the scarf right side out; the two ends will be connected, with a small hole on the edge.
Sew the hole closed with tiny invisible stitches, matching up the center seam.
Done!  Here, I've looped the scarf twice around my neck.
It can also be worn as a hood/scarf combination for those cold and windy days in the bay area!
  Or, the scarf can even be worn with one end looped through the other.  So versatile!
Many thanks to Britex for providing the fabric for this quick and fun project!  







1 comment:

  1. woww. Very creative. I love all shades of green. Thanks for your sharing.

    ReplyDelete